Have you committed the four misunderstandings of buying LED display?led full colour outdoor display Vendor

　　First, don't just look at the optional LED display price

　　Price may be an important factor affecting the sales of LED display. We know the principle of a penny and one penny, but when choosing an LED display company, we may unknowingly approach the low price. LED display famous saying: The huge difference leads customers to ignore the quality. However, in the actual use process, the price difference may actually be the quality gap.

　　Second, the LED display "the same model" is not necessarily "the same product"

　　In the process of selling the LED display, I often come into contact with customers, saying that the same model of full -color LED display, why your price is so much more expensive than others. I was shocked because I reported to the customer at the price of the company's channel. Occasionally, I found that the so -called same model products are actually different. Take the P4LED display as an example. Generally, the pixel spacing of the P4LED display is 4.0 mm, but the market uses 4.81 mm, that is, a display screen of P4.81, and some salespersons advocate the P4 full -color LED display. In this way, the quotation gap becomes obvious. Many unknown customers believe that they have purchased good products at low prices.

　　Third, the higher the value of the technical specifications, the worse the less.

　　When buying an LED display, customers will choose a number of manufacturers to classify, and then decide the LED display supplier. The two important points in the evaluation are price and technical parameters. In the case of similar prices, technical parameters have become victory or defeat. Many customers believe that the higher the parameter value, the better the display quality. Isn't that actually? For a simple example, the indoor P4 full -color display is also on the brightness value of the display screen.

　　Some manufacturers use 2000cd/square meter, and some use 1200cd/square meter. Is that 2000 than 1200? The answer is not necessarily. The interior LED screen brightness requirements are not high, so it is generally between 800 and 1500. The brightness is too high, but it will dazzle viewing. The brightness in terms of life is too high and it is easy to overdraft and display life. Therefore, reasonable use of brightness is a positive solution, not the higher the brightness, the better. In the same model, other parameters need to be considered, such as LED light brands, scanning methods, refresh rates, power consumption, ash, etc. The price of each parameter may be different.

　　Fourth, the shorter the LED display production and testing, the worse.

　　Many customers who buy LED full -color screens can receive the goods immediately when they can't wait. We understand this mood, but the LED display is a customized product. After the production is completed, it takes at least 48 hours of testing. The LED display has increased the continuous test experiments of 24 to 72 hours for national standards. If the delivery period is too short, there are generally two problems. First, without sufficient testing, the failure rate of later use will definitely be relatively high. However, some manufacturers may use other products to accept orders because the same batch of stocks are not enough. This will have obvious color differences on the display, which will have a great impact on the display of the LED display.

Read recommendations:

indoor rental led display wholesale

p7.62 indoor LED module

P2.5 indoor LED module

The installation of splicing screens affects their lifespan and requires caution

LED interactive floor tile display