Indoor LED display and outdoor LED display installation methods are different

　　Lifting is the indoor load-bearing concrete roof can use standard lifting parts, the length of the boom depends on the site conditions. The interior steel beam is hoisted with steel wire rope, and the coat is decorated with steel pipe in the same color as the screen body.

　　Ordinary mounting: Suitable for the display whose total weight is less than 50kg, it can be directly hung on the load-bearing wall without leaving maintenance space. Rotary bracket mounting: suitable for weight greater than 50kg, screen height and width are greater than 1200mm display, must be installed on the load bearing wall, because of its general area is large, disassembly is difficult, so through the screen rotation to solve the maintenance space.

　　The installation structure is to open a hole in the wall and insert the display screen inside it. The size of the hole is required to match the size of the outer frame of the display screen, and to do appropriate decoration. In order to facilitate the maintenance of the hole on the wall, it must be through, otherwise it is necessary to use the former disassembly mechanism.

　　LED display outdoor display installation methods are mounted and mounted.

　　The outdoor LED display area is large, and the design of its steel structure should consider many factors such as foundation, wind load, earthquake magnitude, waterproof, dustproof, ambient temperature, lightning protection and so on. Distribution cabinets, air conditioners, axial fans, lighting and other auxiliary equipment should be placed in the steel structure, as well as maintenance facilities such as horse tracks and ladders. The entire outdoor screen structure should meet the protection level below IP65.

Read recommendations:

led display panel module manufacturer

P3 indoor LED module

C-600 series

LED display screen troubleshooting.indoor rental led display

LED electronic screen large screen display.p3 indoor rental led screen