Do you know the installation steps for LCD splicing screens

source:Industry Trends release time:2024-02-26 Hits:     Popular:led screen wholesaler

Share:

  



  1. Determine installation method: There are several installation methods for LCD splicing screens. It is important to determine whether to use a floor standing bracket, a cabinet, or a wall mounted bracket, and measure the distance from the bracket to the rear wall (with maintenance space reserved at the back).

  2. Installation of Hanging Screen Bracket: Choose a suitable bracket that must be sturdy. Determine the load-bearing capacity based on the size and quantity of the LCD splicing screen, which is generally 1.5 times the weight of the screen body. Ensure stability in all directions, including up, down, left, right, front, and back.

  3. Sequential screen installation: After the bracket is installed, the screen installation begins. Here, pay attention to the installation sequence of the screen, from left to right and from bottom to top. Adjust the gap between the screens, which should not be too large or too small. Generally, it is advisable to smoothly pass through an A4 paper. Ensure horizontal and vertical alignment.

  4. Connect the network cables in sequence: After the screen is installed, the wiring is done. The control cables between the splicing screens are usually network cables, and each screen is connected in series with a network cable. The network cable of the first screen should be connected to the serial port on the computer, so that the entire large screen can be controlled.

  5. Connecting signal cables: Each screen requires a signal cable to be inserted. Nowadays, HDMI high-definition cables are commonly used, and the signal cables on the screen are connected to distributors, matrices, or multi screen processors, so that each screen can display images.

  6. Power on debugging: After the installation of the wire is completed, power on debugging can be carried out. Each screen displays an address code through the computer serial port, assigns the position of the screen, and sends instructions to it. The screen debugging is considered complete.


Read recommendations:

high quolity led screen module direct sales

P8 outdoor LED display

P6 outdoor LED display

More and more full -color LED display security issues need to be paid attention to.outdoor rental le

The development of small space LED is rapid, but we can't just pursue space

LAST: P5 led screen module.Flashing LED Beads and Their Preventive Measures for Use NEXT:The characteristics of two types of large screens in conference rooms
RETURN

Recommended News