source:other news release time:2024-03-04 Hits: Popular:led screen wholesaler
1、 Wall mounted installation
Wall mounted installation is currently the most common installation method, which involves fixing the bracket to the wall with expansion bolts, then hanging the splicing screen on it, debugging it, and completing the installation. The installation is simple and fast. However, due to the weight problem of the whole screen, the background wall must be able to bear weight. It is a cement wall or solid brick wall, such as foam bricks and hollow bricks. Secondly, considering issues such as disassembly and maintenance in the later stage, it is generally not recommended to splice more than 9 pieces, because if there are too many pieces, if there are problems with the middle screen, the adjacent ones should be removed, which will be more troublesome to repair and increase the risk of screen damage.
2、 Installation of floor bracket
The bracket installation is the entire splicing screen supported by the bracket, and the splicing bracket needs to support the weight of the entire LCD splicing screen. This installation method requires high ground requirements. For example, it is required that the ground be solid and flat, and the strength of the splicing bracket is also relatively high. However, the advantage of this installation method is that it is more convenient for future maintenance and troubleshooting.
3、 Pre maintenance installation
Pre maintenance installation, also known as embedded installation, excavates space on the wall and then edge wraps the screen. When maintenance is needed, simply pull it out like a drawer. The advantage of using pre maintenance installation is that it can better integrate with the surrounding environment and save more space.
Read recommendations:
HD led display panel wholesaler
Introduction to 46 inch LCD splicing screen.LED display rental market by cultural
LED display wireless control principle!shenzhen led screen display module