P2 soft LED module.How to adjust the brightness of indoor full-color LED display?

source:Industry Trends release time:2024-01-10 Hits:     Popular:led screen wholesaler

Share:

  

  There are two ways to control the brightness of the indoor full-color LED display:

  1. Change the current through the indoor full-color LED display. Generally, the LED tube can work continuously for about 20ma. In addition to the saturation of the red LED, the brightness of the LED is basically proportional to the current.

  2. Use the inertia of human vision to realize the gray-scale control of pulse width modulation, that is, periodically change the light pulse width (that is, the duty cycle). As long as the refresh frequency is high enough, the human eyes will not feel the shaking of the light-emitting pixels. Because pulse width modulation is more suitable for digital control, microcomputers are generally used to provide LED display content. Almost all indoor full-color LED displays use pulse width modulation to control grayscale.

  The brightness of the indoor full-color LED display must reach 1500cd/m2 or more to ensure the normal playback of the indoor full-color LED display. Otherwise, the displayed image will not be clear due to the low brightness, but many indoor full-color LED displays The brightness exceeds 5000cd/m2, and the playback effect is very good during the day, but such high brightness will cause serious light pollution at night.

  The existing software adjusts the brightness, generally adopts a 256-level adjustment method. In fact, the software is only an operation interface. Through software operation, the PWM duty cycle of the full-color LED display driver is changed to realize the brightness change.

  The brightness of an indoor full-color LED display is very useful for LED screens. Adjusting brightness through software is a basic method and practice in the industry, and is considered an effective method. Generally, after the indoor full-color LED display project is completed, manufacturers Special training will be given to the software, the purpose is to help customers start business as soon as possible.


Read recommendations:

HD LED display screen modules

P2 soft LED module

FC series outdoor common cathode energy-saving full-color LED display

Just four steps to know outdoor LED display wireless control card.led display screen for shop

Identifying new directions for industrial development from LED small pitch displays.china rental led

LAST: p6 waterproof rental cabinet.What are the effects of light environment on the tourism industry NEXT:LED Grille Screen.Before making outdoor LED display screens, it is important to know
RETURN

Recommended News