LED display screen loading issues check these aspects

　　When using outdoor LED displays, there is often a phenomenon of loading failure.

　　Firstly, check if the jumper cap is loose or detached; If the jumper cap is not loose, please ensure that the direction of the jumper cap is correct. Check and confirm that the serial cable used to connect the controller is a straight line, not a crossover line. Check and confirm that the serial port connection wire is intact and there is no looseness or detachment at both ends.

　　Afterwards, it is necessary to select the correct product model, transmission method, serial port number, and serial transmission rate by comparing the LED display screen control software with the control card you have selected, and set the address bits and serial transmission rate on the control system hardware correctly by referring to the dial switch diagram provided in the software. Ensure that the control system hardware is properly powered on.

　　If after the above checks and corrections, there is still a problem with loading, please use a multimeter to measure whether the serial port of the connected computer or control system hardware is damaged. To confirm whether the computer manufacturer should be returned or the control system hardware should be returned for testing.

　　In short, the reason for abnormal loading of LED display screens may be due to issues with the product itself, or it may be caused by improper operation during use. As long as you think carefully or ask the manufacturer, it is easy to find the root cause of the problem.

Read recommendations:

p3 indoor rental led screen

P6.67 oudtoor LED display

p5 outdoor LED module

P3 soft LED module.LED decay and life test

LED display screen manufacturer's private customized shopping mall attracts customers with LED displ