LED screen line installation illustration.small led display screen Manufacturing

　　The installation location is mainly the roof of the building, and the column is suitable for the installation of the LED display on the empty land. Wall -mounted installation: It is mostly suitable for the installation of indoor LED display. There is sufficient maintenance space on the back, and the installation space of the display screen is reserved in the installation time during the installation of the civil project. The hollow brick or simple barrier wall is not suitable for this installation method. The space is equipped with maintenance facilities such as horses and ladder climbing, and auxiliary equipment such as power distribution cabinets, air conditioners, shaft fans, and lighting. There is no need to reserve maintenance space, hanging installation: It is mostly suitable for large places such as the station LED electronic display screen and the airport LED electronic display to play a sign of indications, and the screen body area is small. (Less than 10 square meters) The required place must be installed. According to the size of the screen body area, it can be divided into single -column and double -column -type installation. The field of vision is wide and the surroundings are relatively empty.

　　It can be directly hung on the load -bearing wall. If there are beams or cross beams above, the roof type is installed in except that the screen body steel structure is required.

　　In actual installation, you only need to make a display steel structure to inlaid the display in the building wall. The display box body adopts a positive maintenance design. As the height of the building increases the windproof level, it must also be considered as it increases, and the cost is higher. The wall requirements are real walls. According to the size of the screen area, the same size is dug on the wall. The steel structure is supported between the screen body and the wall surface. In order not to occupy the space, it is installed outdoors. It is suitable for smaller indoor screens, install outdoor screens on the column, and ordinary mounts are suitable for single box display screens with a total weight of less than 50kg. The screen item, and the screen should be added with the back cover, and the display screen can be opened from the bottom during maintenance.

　　Roof type installation: It is mainly suitable for outdoor advertising LED electronic display. It uses pre -maintenance to reserve 800mm maintenance space. Embed the LED display into the wall. Mainly consider basic geological conditions, such as squares, parking lots, etc. It is also necessary to make concrete or steel pillars, inlaid installation: indoors, column installation: more used for installation of outdoor advertising LED electronic display screens.

Read recommendations:

outdoor rental led scren

P3.91 outdoor LED display

LED Crystal Film Screen

LED display.led display screen wholesaler

P5 led screen module.Is the LED industry heading towards MIP or COB?