The difference between full -color LED display P3 and P5.led display screen wholesale

　　LED display type point point between the pixel density maximum brightness driving method best vision distance

　　P3 3mm 111111 point/㎡ ≥1200CD/㎡ 1/16 sweep 3 to 35 meters P5 5mm 4000 points/㎡ ≥1600cd/㎡1/16 1/8 sweep 5 to 50 meters full color display screen

　　1. Point spacing is an important basis for the distinction between the LED full -color display model, and directly determines the pixel resolution of the unit area of the LED display unit. In the field of high -definition LED display, the point spacing is reduced every unit, and it is a technical breakthrough. Looking at the data above, I know: P3 indoor display pixel density 111111 points/㎡, P5 indoor display pixel pixel density of 40,000 points/㎡, just because their point spacing has reduced 2mm, and the pixel points per square meter increased by 71111 points!

　　2. Driving method determines the brightness of the screen body. Because the P5 full -color LED display screen single square meters have fewer pixels, the brightness is higher than the P3 model. If you are semi -outdoor or the location of the indoor window, you must choose a higher brightness model. In terms of power consumption, P3 is definitely larger than P5, the main reason is that the characteristics of pixels and brightness are more than 1200cd/㎡.

　　3. Under the configuration of the same LED display box and power supply, control card, P3 indoor LED display screen is definitely more expensive than the P5 indoor LED display. The important reason is that there are more LED lamp beads in the unit area. Cause cost upload.

Read recommendations:

outdoor rental led scren sales

P2.604 indoor LED display

P3 indoor LED module

LED display is not as bright as possible

How to make the full -color LED display become energy saving and environmental protection?advertisin