Precautions for fluorescent display screens.stage led screen for concert

　　1. When switching on and off the fluorescent display screen, the interval time should be greater than 5 minutes.

　　2. After entering the engineering control software, the computer can only be turned on and powered on.

　　3. Avoid turning on the screen in a fully white state, as the system's impulse current is at its maximum.

　　4. Avoid opening the screen in a state of loss of control, as the impact current of the system is at its maximum.

　　5. When the ambient temperature is too high or the heat dissipation conditions are not good, attention should be paid not to open the screen for a long time.

　　6. When a very bright line appears on a part of the fluorescent display screen, attention should be paid to turning off the screen in a timely manner, and it is not advisable to turn on the screen for a long time in this state.

　　7. The power switch of the display screen often trips, and the screen body should be checked or the power switch should be replaced in a timely manner.

　　8. Regularly check the firmness of the coupling. If there is any looseness, please adjust it in a timely manner, and reinforce or update the suspension components.

　　9. According to the environmental conditions of the display screen and control part, avoid insect bites, and if necessary, place rodent repellents.

Read recommendations:

outdoor rental led display Production

P5 outdoor LED display

P4 indoor LED Display

LED lamp belt.china rental led screen cabinet manufacture

Principle of LCD display screen.LED Crystal Film Screen