LED Grille Screen Solution.LED display screen on/off precautions

　　When turning on the screen: power on first, then turn on the screen.

　　When turning off the screen: turn off the screen first, then turn it off.

　　(Turning off the computer first without turning off the display screen can cause high bright spots on the screen, and the LED will burn out the light tube, resulting in serious consequences.)

　　2. The time interval between opening and closing the screen should be greater than 5 minutes.

　　3. After the computer enters the engineering control software, the screen can be opened and powered on.

　　4. Avoid turning on the screen in full white mode, as the system's surge current is at its maximum.

　　5. Avoid turning on the screen in a state of loss of control, as the system's surge current is at its maximum.

　　6. When a very bright line appears on a part of the electronic display screen, attention should be paid to turning off the screen in a timely manner, and it is not advisable to turn on the screen for a long time in this state.

　　7. The power switch of the display screen often trips, and the screen body should be checked or the power switch should be replaced in a timely manner.

　　8. Regularly check the firmness of the connectors. If there is any looseness, please adjust it in a timely manner, reinforce or update the suspension components.

　　9. When the ambient temperature is too high or the heat dissipation conditions are poor, LED lighting should be careful not to turn on for a long time.

Read recommendations:

P4.81outdoor /indoorled screen modules

LED Crystal Film Screen

P2.5 indoor LED module

The LED light rod screen greatly enhances the degree of intelligence

P1.923 led screen modules.Test methods and conditions for full color LED display screens