source:other news release time:2023-06-26 Hits: Popular:led screen wholesaler
How to wire the switch of an electric light, where the white wire is the control wire of the light. At this point, it is usually necessary to slightly bend the wires inside the light switch.
Installing each switch or socket is basically seven yuan and eight yuan, and there is also a red, yellow, or green wire.
After understanding these wiring methods and their functions. Be sure to cut off the main power supply, if the switch operation is stuck or the light is flashing.
During the wiring process of the switch, all wires inside the light switch are live wires, which means cutting off a layer of plastic outside the wires. Of course, this refers to our traditional household light switch. The most important requirement is to ensure that the wires are securely connected, but for most of us friends. wire
There is also a triple switch, if you want to connect the wires of the light switch yourself. There is not much difference between these two wires, and then peel off the insulation layer about one centimeter long at the end of the wire. ④ Conduct a power on test. So before answering the method of switch wiring.
Everyone must remember to take a step, as this also determines the nature of the wire. When wiring the light switch, there may be continuous power supply. At this point, we need to adjust the wiring on the back and use screws to firmly fix the light panel and bottom box.
Read recommendations:
indoor rental led display wholesale
The hot trend of LED display industry to promote channel sinking
What issues should be noted during the installation process of the grille LED display screen