What are the preparations before installing the LCD splicing screen

　　LCD splicing screens are not unfamiliar to everyone. Nowadays, shopping malls, exhibition halls, and conference rooms often use this type of large screen, which not only randomly splices but also has excellent display effects, and is deeply loved by users. So, do you know what preparations are needed before installing a LCD splicing screen? Next, let the editor answer for you.

　　1、 Equipment placement: Equipment should be placed reasonably; If installed in a standard rack, chassis, or cabinet, or placed on a stable and flat workbench to prevent the equipment from falling and causing damage due to collision.

　　2、 Cable: Items should not be placed on power lines, signal lines, communication lines, and other cables. The cable should be avoided from being stepped on or squeezed to prevent electrical leakage or short circuits, which may damage the safety of indoor high-definition LCD splicing screens.

　　3、 Signal line connection: When plugging and unplugging the signal line from the device, the device needs to be powered off to avoid damage (damage caused by live plugging is not covered by the warranty).

　　4、 Power supply: It is necessary to use a single-phase three wire AC 220V power supply with protection, and ensure that the entire engineering system uses the same protection; Unprotected power sources cannot be used, and the grounding pin of the power cord must not be damaged.

　　5、 Power outage: Before installing the LCD splicing screen, when moving equipment or performing other work that requires power outage, all power sources should be turned off, including the power switch, unplugging the power plug, etc., to ensure the safety of maintenance personnel, users, and equipment.

Read recommendations:

led display panel module company

P6 outdoor LED display

P3 soft LED module

LED display is not as bright as possible

Is there any led mosaic or dead center phenomenon.outdoor led advertising screen Production