source:other news release time:2023-05-10 Hits: Popular:led screen wholesaler
1. With the shortest time, use a centrifugal fan or other special tools to completely dry the water inlet body.
2. The screen body is powered and aging, and the operation process is below:
① adjust the brightness (all-white) to 10%, and the aging aging is 8-12 minutes.
② Turn the brightness (all white) to 30%, and the aging of power is 12 hours.
③ Turn the brightness (all white) to 60%, and the aging of power is 12-24 hours.
④ Turn the brightness (all white) to 80%, and the aging aging is 12-24 hours.
⑤ Turn the brightness (all white) to 100%, and the aging aging is 8-12 minutes.
3. For the process of the upper process, most of the screen body may be restored; but in the processing method, it is necessary to pay attention to the following aspects:
① When you find that the warehouse is in water or the LED large screen screen is in water, it should be treated urgently without having to drag time.
② The institutional staff expands drying the LED screen body of the water inlet.
③ Do not need to put the large LED screen screen that has been in the air in the airbox, which is very simple to damage the LED lights.
④ When entering the warehouse, the aircraft box may be in water. It should be exposed to all the aircraft boxes to prevent the water from evaporating the water after loading the shell to the LED display screen.
⑤ The LED display of all water inlet is not properly processed. It is likely that it is more or less harmful to the reliability of the screen body. In the emergency treatment method, the screen body is likely to have continued dead lamps after power power.
⑥ The LED display screen of the water inlet is in the air box. More than three days, most of the screen body has no repair value, please handle it carefully.
Read recommendations:
led outdoor display screen wholesaler
Composition of the splicing LCD large screen central control system