How to extend the lifespan of LED light sources?

　　If there are 100 LED light sources working together and the distance between them is only 11.4mm, then the temperature of the LED light source bracket around the lamp stack can also not exceed 45 degrees, but the LED light sources in the center of the lamp stack can reach a high temperature of 65 degrees. At this time, the LED light source is a detection. So, the LED light sources concentrated in the center will theoretically decay faster, while the LED light sources around the lamp stack will decay slower.

　　But if the LED beads are separated by more than 25mm, the heat they emit from each other will not accumulate as much. At this time, the temperature of each LED bead holder will be less than 50 degrees Celsius, which is more conducive to the normal operation of the LED.

　　If the environment for LED homework is in a relatively cold area, and the average temperature throughout the year can only be around 15 degrees Celsius or less, then for LEDs, their lifespan is longer.

　　Perhaps during the LED homework, there is a small fan blowing around to help it repel the heat, which is also helpful for the lifespan of the LED.

　　We should know that LEDs are afraid of heat, and the higher the temperature, the shorter the lifespan of the LED. The lower the temperature, the longer the lifespan of the LED. The operating temperature of LED Zhiqu is naturally between minus 5 and zero degrees Celsius. But this is basically impossible.

Read recommendations:

rental led display panel Manufacturing

P10 outdoor LED module

P2.604 indoor LED display

P3.91 indoor LED display.Application analysis of 55 inch LCD splicing screen!

How to use spliced large screens in commercial displays to enhance brand image