Some methods and measures to maintain the outdoor LED display.led aluminum cabinet screen manufacturer

source:other news release time:2023-04-23 Hits:     Popular:led screen wholesaler

Share:

  indoor rental led display direct sales

  1. Outdoor LED large screen resistance and earthquake resistance

  As the application of large -screen advertisements for outdoor LED is becoming more and more wide, the installation form of LED large screens is becoming more and more diverse, including wall -mounted installation, inlaid installation, hanging, roof installation, and column installation. In order to use LED large screen devices without falling, there are strict requirements for the choice of wind load and seismic resistance, especially the requirements for roof installation and column installation are stricter than other forms.

  2. Outdoor LED large screen lightning protection measures

  In order to ensure good grounding, all metal boxes and rear lids of LED large screen equipment have separate ground terminals. The terminal connection position of the terminal is waterproof fastener. The spiny wheel pad is reliable. Large screen equipment adopts a common ground line structure, which is a "three ground" (equipment work grounding, power supply ground, lightning protection ground).

  3. Outdoor LED large screen inside and outside leakage

  Mask and cabinet are made of insulating material. The insulating material resistance is greater than 10 trillion ohm, and the leakage current is less than 1.8mA. After being tested by this department, the product can still bear 50Hz under the conditions of the boom. The insulation intensity requirement is 1500W test voltage breakdown for 1 minute. The circuit board will be protected by three -proof paint. The quality of large LEDs and large screens should be higher than IP65 waterproof in the international protection system.class. In this way, it can ensure leakage from material to waterproof performance

  4. Control the humidity outdoor large -screen internal humidity

  The full -color screen with humidity will cause the LED large screen parts to corrode and cause damage; so keep it in the environment of the full color LED screen, do not let anything with humidity characteristics enter your LED large screen to enter your LED large screen Essence

  5. Outdoor LED large screen active protection

  Avoid possible problems, take the initiative to protect, try to remove the large screen of LED screens from the screen; and when cleaning the screen, wipe it as much as possible to reduce the possibility of damage to the LED display.

  6. Outdoor LED large screen control screen body current

  Do not stay on the bright screens such as full white, red, green, and blue for a long time, so as not to be too large, the power cord is overheated, damaged the LED light, and affects the service life of LED large screens. Do not disassemble or stitch the screen at will

  7. Outdoor LED display control time

  It is recommended that the LED large screen rests is more than 2 hours a day, and it is used at least once a week in the rainy season. Generally open the screen at least once a month, and it has been on for more than 2 hours


Read recommendations:

full sexy video full hd led screen

P5 indoor LED module

Small Pixel P1.56

Several little knowledge of full -color LED display pixels

Three Methods of Packaging Solid Crystal Adhesive for White LED Beads.p5 outdoor LED module

LAST: How to solve the cooling problem of indoor LED display?led aluminum cabinet screen distributors NEXT:Introduction to Small Spacing LED Display Screen.led aluminum cabinet screen custom
RETURN

Recommended News